Communication is critical on job sites where workers must be able to clearly interact with one another. Whether for issuing warnings or coordinating movements, audio devices (like cell phones and radios) can help increase the speed and accuracy of communication among workers. Although radios provide good voice communications between workers, there are some notable downsides:
- Half-duplex – this type of communication can go back and forth between workers, but only in one direction at a time
- Push-to-talk – on many devices, the worker must push a button to begin transmission
- Wires – many systems require wires to connect the microphone to the transceiver unit, which can be a nuisance and even a safety concern
Devices that have any of the above characteristics can often slow down worker communication and require the use of a hand that’s already occupied with a task.
How smartphones are different than half-duplex devices
Unlike radios, smartphones are duplex devices that allow simultaneous two-way communication between workers. When paired with a device with Bluetooth® wireless technology, the communication equipment can also become wireless and hands-free. Removing the need for a wire on a device helps prevent
- Worker distractions
- Interference with tools or equipment on the job
- Snagged wires that could cause an accident
For worksites that allow the use of smartphones, another benefit is that many types of devices allow project managers or safety personnel to monitor the progress of job operations from remote locations. Smartphones also allow cross-communication between workers in different areas of the job site, allowing them to communicate more accurately and easily with one another. Smartphones can also be used in training new workers. Using a smartphone on the job can allow trainees or apprentices to observe and hear communications between experienced workers.
Why hearing protection is critical
We know that communication on a job site is critical, but so is protecting worker hearing. Communication devices like smartphones are rendered useless if workers can’t hear or understand what’s being said in their environment.
Exposure to hazardous noise is one of the most common occupational exposures in the construction industry. In the United States, the University of Washington monitored the noise measurements of 1,300 construction sites and found that, dependent on the trade, 70% of workers were exposed to noise levels above 85 decibels – which is the occupational exposure limit recommended by the National Institute for Occupational Safety and Health (NIOSH) and CSA. A second study by the university showed that workers only wore hearing protection 20-40% of the time when the noise exposures exceeded 85 dBA. Data from a study conducted by WorkSafeBC showed that 24% of young workers in construction in British Columbia do not wear any hearing protection on the job. A third study in Washington State indicated that while construction workers only made up 7% of the workforce, they accounted for 21% of hearing loss claims.
This is why hearing protection devices that integrate smartphones using Bluetooth® wireless technology are invaluable. You can connect a communication device like the 3M™ PELTOR™ Wireless Communication Accessory to your 3M™ PELTOR™ Earmuffs to provide hands-free communication between workers. Some of the key features that workers rely on are
- Allows for a superior range of operation
- Compatible with required hearing protection (earmuffs)
How worker productivity is enhanced
The above features can help improve safety by improving worker operations and communications. By using devices that are already available (i.e., the worker’s own smartphone), the investment in a communication improvement is minimal and also helps reduce the amount of items a worker needs to carry. Today’s smartphones are small and lightweight, which are valuable when they’re being used by workers who might already carry several pounds of equipment on their work belt. One of the most obvious benefits of increased worker communication via smartphone use is that such devices can serve as motivation for workers to wear the hearing protection that they might otherwise ignore.
Enhancing worker communication, reducing the chances of mistakes being made, speeding up production and motivating workers to wear their hearing protection are all added benefits of smartphone use on job sites where immediate, two-way communication is essential.
Contact us to learn more about the 3M™ PELTOR Wireless Communication Accessory or to discuss a communications solution for your unique needs.
Contact a Representative
Thank you! Your request was submitted successfully. A representative will contact you shortly.
 Neitzel, et al. Annals of Occup. Hyg. 55 (5) 2011
 Neitzel et al. Jr. Occup. And Envrion. Health 2 (4) 2005
 WorkSafeBC, “New data shows young construction workers less likely to wear hearing protection.” Published February 23, 2017. https://www.worksafebc.com/en/about-us/news-events/news-releases/2017/February/young-construction-workers-hearing-protection
 Construction Industry Noise Exposures School of Public Health, University of Washington 2004.
The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.