Wear it right: 3M™ Half Facepiece Reusable Respirator, 7500 Series

December 4, 2017

With options available for a standard fixed suspension or drop-down suspension for users who wear hard hats or the 6500QL, it’s important to make sure workers are properly wearing the 3M™ Half Facepiece Reusable Respirator, 7500 Series to get the respiratory protection they need.

Use this visual guide to help workers learn how to properly wear this type of reusable respirator, whether they are using the standard fixed suspension or drop-down suspension for hard hat use.
 

What to expect in this guide:

  • How to don the 3M™ Half Facepiece Reusable Respirator, 7500 Series
  • How to properly attach and adjust the straps for standard suspension use
  • How to properly attach and adjust the straps for drop-down suspension use
  • How to perform a positive pressure user seal check
  • How to perform a negative pressure seal check using 3M™ Particulate Filters
  • How to perform a negative pressure seal check using 3M™ Cartridges

Learn how to wear it right.

Note: Per CSA Z94.4, Fit testing is required for users of all tight-fitting facepiece respirators.


Contact a Representative

Need help choosing the right personal protective equipment for your application? We’d be happy to help.

*Indicates a required field.




  • Enter your 10-digit phone number. Numbers only. eg. 5555555555
  • 3M will use your personal information to solely respond to your request and in accordance with our Privacy Policy.

    Opt-in: I would like to receive electronic messages, which may include promotions, product information and service offers, from 3M. I understand that I may unsubscribe at any time using the opt-out link provided in every electronic message.

    3M takes your privacy very seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications, which may include promotions, product information and service offers.

Thank you! Your request was submitted successfully. A representative will contact you shortly.

Previous Article
Look for the CSA certification mark
Look for the CSA certification mark

Learn how changes to Standard Z94.3 can affect your welding and eyewear products.

Next Article
Wear it right: 3M™ Full Facepiece Respirator, 6000 Series
Wear it right: 3M™ Full Facepiece Respirator, 6000 Series

Knowing how to properly wear a reusable respirator is an important step in protecting workers from airborne...