Fall clearance calculation chart
To determine the required Fall Clearance add the appropriate factors together, this will give you the safe Required Distance (RD) below the working surface
Read Article
Are you still in compliance with the Ontario Ministry of Labour’s at-heights worker regulation?
If you completed your Working at Heights training in April 2015, it's time to get re-certified before your credentials expire in April 2018.
Read Article
Infographic: Know your fall protection facts
Download the Fall Protection Facts infographic to access facts on annual Canadian fall protection occupational injuries and fatalities.
Read Article
Product Stop Use: Lead Energy Absorbing Posts used in roof-mounted Evolution™ Horizontal Lifeline Systems
3M Fall Protection has received field reports of broken end-posts used in roof-mounted EvolutionTM Horizontal Lifeline Systems.
Read Article
Rescue training: In the event of a fall, do you have a plan?
You’ve chosen the right safety harness, completed the proper training, and you have a fall protection plan in place. But what happens after the fall? Do you have a rescue plan in place to promptly...
Read Article
Attach in seconds with the 3M™ DBI-SALA® Quick Spins
Read Article
See the impact: Fall Protection for Tools in slow motion
Read Article
How to properly use the 3M™ DBI-SALA® Radio Holster
Read Article
Safely getting your equipment where it needs to go with the 3M™ DBI-SALA® 5 Gallon Bucket
Read Article
Increasing tool durability with the 3M™ DBI-SALA® DR-CORD
Read Article
Standing up to falls: Learning the ABCDs of fall protection
A fall from heights is a risk that every at-height worker must be prepared for. Helping you manage your risk to bring you home safely at the end of the day is something 3M Fall Protection prides itsel
Read Article
Taking gravity out of the equation with an expanded lineup of 3M™ DBI-SALA® Fall Protection for Tools
With over 27,000 recorded incidents of people being struck by falling objects each year in Canada, dropped objects prevention planning helps prevent personal injury, equipment damage and tool...
Read Article
How to properly use the 3M™ DBI-SALA® Safe Bucket
Read Article
How to properly use the 3M™ DBI-SALA® Tape Measure Holster
Read Article
Taking gravity out of the equation with an expanded lineup of 3M™ DBI-SALA® Fall Protection for Tools
3M Canada is introducing four new Fall Protection for Tools products: 3M™ DBI-SALA® 5 lb Tool Retractor, Harness Adapter, Hook2Hook Coil Tether with Swivel and Large 35’ Tape Measure Sleeve.
Read Article
Get tether-ready with 3M™ DBI-SALA® Quick Rings
Read Article
Product Retrofit Notice: 3M™ DBI-SALA Adjustable Barrel Mount Davit Sleeve
3M Fall Protection has determined that the barrel mounts do not fully meet all load claims in all adjustment positions as represented in the “Instruction for Use” (IFU) manual and on product labels.
Read Article
