3M™ Advanced Particulate Filter, 2297

July 17, 2017

3M™ Advanced Particulate Filter 2297 is designed to make breathing easier while lasting longer. NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance level organic vapours and for ozone protection up to 10X OSHA PEL.

Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, or 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half Facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Also offers nuisance level relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Not NIOSH certified for use against ozone. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH).

  • P100, nuisance organic vapour relief particulate filter
  • Easier breathing
  • Long lasting
  • Use with 3M™ Reusable Respirators

Learn more about this product.

Previous Article
3M™ Particulate Filter, 2091
3M™ Particulate Filter, 2091

3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, ...

Next Article
Which 3M™ Reusable Respirator is a top customer-favourite?
Which 3M™ Reusable Respirator is a top customer-favourite?

Choosing the right reusable respirator can be a challenge, especially if you don’t know where to start. You...