3M™ Particulate Filter, 7093, P100

January 29, 2018

3M™ Particulate Filter 7093 is NIOSH approved for environments containing certain oil and non-oil based particles. It is designed for use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series, or 3M™ Facepieces 7000 Series with bayonet filter holders.

When properly fitted, the 3M™ Particulate Filter 7093 can be used in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).

  • Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode
  • Do not use in environments that are Immediately Dangerous to Life or Health (IDLH)
  • Designed for higher heat applications
  • Solid-top-air-inlet design creates a channeled airflow that helps reduce premature loading

Learn more about this product.

Previous Article
3M™ Versaflo™ Headcover Powererd Air Purifying Respirator Kit, TR-600-HKL
3M™ Versaflo™ Headcover Powererd Air Purifying Respirator Kit, TR-600-HKL

3M™ Versaflo™ Headcover Powererd Air Purifying Respirator Kit, TR-600-HKL is a complete, ready to use Power...

Next Article
Keeping 3M™ Reusable Respirators close at hand
Keeping 3M™ Reusable Respirators close at hand

3M™ Half Facepiece Respirator Storage Bag, 6584 helps keep reusable respirators clean and easily accessible.