Cleaning and inspection: 3M™ Secure Click™ Half Facepiece Reusable Respirator, HF-800 Series

3M Secure Click Respirator Inspection

Inspect facepiece, filters and/or cartridges prior to use. Any damaged or defective parts must be replaced prior to use. In addition:

  • Ensure faceseal and cartridge/filter connection seal area are not distorted
  • Make sure straps are intact and have good elasticity
  • Ensure inhalation/exhalation valves lay flat against valve seat
  • Ensure speaking diaphragm (SD) seal is in place, the SD film is intact, and the SD is securely inserted in the facepiece
  • Ensure filters/cartridges are securely attached to facepiece prior to use and the cartridge/filter release button is in the latched position

Cleaning

Cleaning is recommended after each use.

  • Remove filters and/or cartridges
  • Remove additional facepiece components for cleaning, as needed
  • Clean facepiece with a 3M™ Respirator Cleaning Wipe, 504 (as an interim cleaning method) or by immersing in warm cleaning solution, up to 49ºC (120ºF), and scrub with soft brush or cloth until clean– add neutral detergent if necessary
  • Ensure the cartridge/filter connection area is free of debris.
    Use a cloth or soft brush to reach this area and/or move facepiece back
    and forth quickly while it is immersed in cleaning solution
  • Rinse in fresh, warm water
  • Air dry in a non-contaminated atmosphere You can also use a respirator washer to clean the facepiece.
  • Water temperature should not exceed 49ºC (120ºF)
  • Air dry in a non-contaminated atmosphere

Respiratory warning

Download the guide.

Icon of an arrow.

Need help choosing the right personal protective equipment for your application?

Leave your contact information so a representative can get in touch with you.

*Indicates a required field.




  • Enter your 10-digit phone number. Numbers only. eg. 5555555555
  • 3M will use your personal information to solely respond to your request and in accordance with our Privacy Policy .

    Opt-in: I would like to receive electronic messages, which may include promotions, product information and service offers, from 3M. I understand that I may unsubscribe at any time using the opt-out link provided in every electronic message.

    3M takes your privacy very seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications, which may include promotions, product information and service offers.

Thank you! Your request was submitted successfully. A representative will contact you shortly.

 
Previous Article
Conversion guide: 3M™ Secure Click™ Half Facepiece Reusable Respirator HF-800 Series
Conversion guide: 3M™ Secure Click™ Half Facepiece Reusable Respirator HF-800 Series

Designed with smart and intuitive features, the 3M™ Secure Click™ Half Facepiece Reusable Respirator helps ...

Next Article
Discover the soul behind 3M™ respiratory protection science.
Discover the soul behind 3M™ respiratory protection science.