Wear it right: 3M™ Half Facepiece Reusable Respirator, 7500 Series

December 4, 2017

With options available for a standard fixed suspension or drop-down suspension for users who wear hard hats or the 6500QL, it’s important to make sure workers are properly wearing the 3M™ Half Facepiece Reusable Respirator, 7500 Series to get the respiratory protection they need.

Use this visual guide to help workers learn how to properly wear this type of reusable respirator, whether they are using the standard fixed suspension or drop-down suspension for hard hat use.
 

What to expect in this guide:

  • How to don the 3M™ Half Facepiece Reusable Respirator, 7500 Series
  • How to properly attach and adjust the straps for standard suspension use
  • How to properly attach and adjust the straps for drop-down suspension use
  • How to perform a positive pressure user seal check
  • How to perform a negative pressure seal check using 3M™ Particulate Filters
  • How to perform a negative pressure seal check using 3M™ Cartridges

Learn how to wear it right

Note: Per CSA Z94.4, Fit testing is required for users of all tight-fitting facepiece respirators.

Previous Article
Keeping 3M™ Reusable Respirators close at hand
Keeping 3M™ Reusable Respirators close at hand

3M™ Half Facepiece Respirator Storage Bag, 6584 helps keep reusable respirators clean and easily accessible.

Next Article
Wear it right: 3M™ Full Facepiece Respirator, FF-6000 Series
Wear it right: 3M™ Full Facepiece Respirator, FF-6000 Series

Knowing how to properly wear a reusable respirator is an important step in protecting workers from airborne...